Downloads & Manuals
Need help with your product?
Our Help & Support area contains articles and videos to help you get the most from your product.
IMO Type Approval
Used in the supplied configuration with M5024 pilothouse monitor and type-approved ENCs (Electronic Navigational Charts), the Simrad E5024 ECDIS system is IMO type approved for use on all SOLAS ships and other vessels that must carry an Electronic Chart Display and Information System under the ECDIS Carriage Mandate.
Under SOLAS amendments all existing large passenger, tanker, and cargo ships will be obliged to fit ECDIS on a rolling timetable that began in July 2012 and ends in July 2018. All new passenger ships over 500gt, tankers over 3,000gt, and cargo ships over 3,000gt are already required to carry an ECIDS system.
Widescreen High-Definition Display
The ECDIS E5024 system includes the Simrad M5024 24-inch, 16:9 widescreen monitor. This provides a larger usable chart area than conventional 4:3 or 5:4 ‘square’ ECDIS displays, while leaving ample room for controls, instruments, and status information. Its Full HD 1920 x 1080-pixel resolution delivers sharp, highly detailed charts, with crisp and clear text for maximum readability.
A modern interface offers rapid access to critical features with clearly labelled quick access tiles. Route planning is simplified through integration with the main chart window and drag-and-drop manipulation of waypoints.
The E5024 system consists of a standalone ECDIS processor, connected by a single HDMI cable to a flush-mount monitor. The included trackball controller connects wirelessly, and may be used on any console or surface. With just a monitor cut-out required, a compact and easily-mounted processor, and minimal wiring, a quick and simple installation is possible on most vessels.
PLECDIS (Paper-Less ECDIS) Support
Two E5024 ECDIS systems may be linked with a single Ethernet cable to create a cost-effective, IMO type-approved ‘Paper-Less ECDIS’. This allowing vessels to navigate without paper charts, in compliance with SOLAS requirements. All routes, mariners objects and charts are automatically synchronised between the two systems, and systems can be configured to share connected sensors – different stations can be used for planning and navigation, installed side-by-side on the bridge or in separate areas of the ship.
Radar, AIS & ARPA Overlay
Maximise situational awareness with real-time radar image and AIS/ARPA target overlays. Immediately see where storm cells and other weather features lie in relation to your planned course, and navigate with a comprehensive view of surrounding marine traffic and other collision hazards. Overlay functionality works with Simrad Argus radar, and any NMEA0183-compatible ARPA or AIS receiver.
The Simrad E5024 ECDIS system is designed to operate with C-MAP-distributed cartography, and also provides S-57 and S-63 import capability for third-party charts.
Navico supplies type-approved PRIMAR SENC and AVCS charts, available on two separate NavSticks, via the C-MAP system. C-MAP offers a choice of subscription models for these charts:Pay As You Sail (PAYS): Best suited to vessels that don’t operate static routes, the required ENC cells are automatically unlocked and charged as you pass through a geographic location.
Standard Subscription Area (SSA): The most economical option for vessels covering static routes or operating in smaller geographic regions, pre-license and pay for specific ENC cells to cover the area you need.The E5024 ECDIS system supports chart installation from USB flash drives, including C-MAP’s NavStick. NavStick can be updated with the latest available charts via any internet-connected PC.
AIO (Admiralty Information Overlay)
Fully supported on the E5024, AIO provides addition