Simrad MX575D D/GNSS Compass

The Simrad MX575D D/GNSS (Global Navigation Satellite System) compass is designed to provide reliable heading, ROT and position information to Simrad Autopilots and the MX Series of navigation and AIS transponder systems. The MX575D compass has enhanced heading and position performance with a GPS and GLONASS sensor.

  • IMO Type-Approved as a primary positioning AND heading device when used with SIMRAD CDU
  • Compatible with new MX610/MX612/GN70 CDU's
  • Enhanced heading and positioning performance with GLONASS
  • Pitch, roll and heave as standard output
  • Heading accuracy < 0.5° RMS with GPS and GLONASS
  • Heading updates 1-20 Hz
  • DGPS Position accuracy (no SA) < 1.0m
  • GPS Position accuracy (no SA) < 3.0m
  • Fast start-up times
  • Integrated DGPS source including WAAS, EGNOS and Beacon
  • Provision for external RTCM SC104 corrections
  • More satellites tracking means better geometry
  • NMEA 2000 interface with NMEA 2000 adaptor
Sales Enquiry

    The Simrad MX575D D/GNSS compass is type-approved to the latest IMO regulations including RAIM (Receiver Autonomous Integrity Monitoring). The MX575D delivers heading accuracy of better than 0.5° and provide sub-meter DGPS positioning accuracy. This level of accuracy is achieved in the MX575D by using the RTCM correction data supplied from its internal beacon demodulator or from SBAS.

    TYPE APPROVALS

    Both the MX575D has two IMO compliance certifications which is a big advantage for Simrad customers. A separate IMO compliant antenna is not required as the compasses meet both navigation and heading function approvals.

    SUPPLEMENTARY SENSORS

    Integrated Gyro and tilt sensors deliver fast start-up times and provide heading updates during temporary loss of satellites.

    INTERFACE

    The standard interface on the MX575D is NMEA 0183, but can also be used as a NMEA 2000 device with an optional adaptor.

    Technical/Environmental

    Product Length [mm] 26.1 in / 663 mm
    Operating Temperature -30°C to + 70°C (-22°F to + 158°F)
    Operating Temperature Stored -40°C to + 85°C (-40°F to + 185°F)
    Product Width 8.3 in / 209 mm
    Product Height 5.8 in / 146 mm
    Product Weight 5.4 lbs / 2.4 kg

    Other

    Humidity Range [rh] 95% non-condensing
    Compass Safe Distance [mm] 750

    Information

    Picth/Roll Angle

    Power

    Power Consumption 4.3 W nominal (GPS L1 + GLONASS L1)
    4.6 W nominal (GPS L1 + GLONASS L1 + Beacon)
    Reverse Polarity Protection Yes

    Communications

    Baud Rates 4800 - 38400
    Correction I/O Protocol RTCM v2.3 (DGPS), RTCM SC-104, L-Dif
    Serial Ports 1 full-duplex RS232; 1 full-duplex RS422 and 1 half-duplex RS422 (Tx only)

    GPS Navigation

    Heading Accuracy 0.5°
    Heading Fix 10s typical (valid position)
    Rate of Turn 90°/s maximum

    Networking Connectors

    Connectors Power/Data Connector: 18-pin, environmentally sealed

    SERVICE & SUPPORT

    When you choose a product from Navico Commercial, you are automatically protected by our service and support program.

    Our Service & Support program aims to provide the best possible experience, even on occasions when support or replacement is required.

    Choosing to have your system installed by a Certified Dealer adds 2 Year Onboard Support and 24 Hour Replacement to your support package. This is available only on systems installed by a Certified Dealer and valued at over US$2500.

    Learn more about Service & Support

    LIMITED WARRANTY

    Navico guarantees its products against defects in materials or workmanship according to the terms and conditions detailed within the Navico Warranty Policy. Customers can obtain warranty support by contacting: